WIAG-IBR200 Itaba low starting flow sensor
Technical parameters
Pipe size: 200-2000 mm;
Applicable temperature: -40 to 200℃
Applicable pressure: 0-2.5MPa;
Accuracy grade: ±1%
Reproducibility: ±0.1%
Range ratio: 20:1
Measured medium: pure gas, flue gas or gas containing a small amount of impurities, dirty gas, gas containing a large amount of dust or tar, etc.
- Parameters
Technical parameters
Pipe size: 200-2000 mm;
Applicable temperature: -40 to 200℃
Applicable pressure: 0-2.5MPa;
Accuracy grade: ±1%
Reproducibility: ±0.1%
Range ratio: 20:1
Measured medium: pure gas, flue gas or gas containing a small amount of impurities, dirty gas, gas containing a large amount of dust or tar, etc.
Product Features
It is suitable for measuring low flow rates and large pipe diameters
The rectification effect of the V-cone is excellent, with lower pressure loss and smaller requirements for straight pipe sections
There is no concept of acute angles, and the primary components can operate stably for a long time
It has excellent anti-vibration performance and good pressure equalization effect
The plug-in installation method is simple to install, convenient to maintain and has low pressure loss
Control differential pressure, flow area and pressure drop to avoid micro-differential pressure and out-of-range conditions
Copy product links
Long by picture save/share
Contact Us
Unit 1804, South Bank Tower, 55 Upper Ground, London, United kingdom, SE1 9EY.
+0044-2084 /323-088
info@wiag-ita.uk
Copyright © WIAG Automation Group All Rights Reserved.
Copyright © WIAG Automation Group
All Rights Reserved.
